Catalog 2015
Brochure Page 1
Catalog 2015
Brochure Page 2

APPLICATION

WATCH & LEARN HOW TO APPLY THE GEL SYSTEM

  • Nail Preparation

    1. Cleanse hands thoroughly to ensure that there are no bacteria.

    2. Lift the cuticles and remove them.

    3. Use a fine grit file to remove shine and surface oils, make sure to create a slightly textured surface on the nail plate in order for a better bonding surface, because a rough surface will bond well with the gel.

    4. Remove the file dust with cleanser.

  • How to Apply Base Gel

    1. Place gel near the cuticles

    2. Push gel to the edge of the cuticles then pull down to the nail edge • gel must not touch skin

  • How to Apply French White Gel

    1. Place the White French Gel on the center of the nail edge

    2. Drag the gel evenly to create a smile line, avoiding touching the nail with the brush

    3. Shape the smile line with a clean brush, starting from the center toward the edge

  • How to Apply Builder Gel

    1. Place gel near cuticles

    2. Push gel to the edge of the cuticles to build a groove, then pull down to the nail edge -brush will touch nail bed

    3. Place second layer on the center of the nail bed
    -avoid touching the nail with the brush but hover over the second layer to adjust the arch

  • French Nail Application(Thin French)- Type 1

    1. Apply protein bond.

    2. Scoop a type of foundation gel with a gel brush and apply evenly onto the nail plate. - Cure in UV lamp for 2 min.

    3. Apply type of builder gel to reinforce the nail with thickness and shape for the next step. - Cure in UV lamp for 2 min.

    4. Cleanse the nail plate thoroughly, shape the nail by filling according to the clients desires, and wipe the file dust.

    5. Using the High White Gel, create a thin-layered smile line on the free edge. - Cure in UV lamp for 2 min.

    6. Apply the selected top gloss with even pressure. - Cure in UV lamp for 2 min.

    7. Cleanse the nail plate thoroughly in order to remove the stickiness and improve shine using cotton or gauze.

    8. Lastly, apply oil on the nails in order to protect the cuticles.

  • French Nail Application(Thick French)- Type 2A

    1. Apply protein bond.

    2. Scoop a type of foundation gel with a gel brush and apply evenly onto the nail plate. - Cure in UV lamp for 2 min.

    3. Draw a thick layer of smile line using French White Gel. - Cure in UV lamp for 3 min.

    4. Apply type of builder gel to reinforce the nail with thickness and shape for the next step. - Cure in UV lamp for 2 min. There are two different types of applying the builder gel:

    a. In a single step, you can apply the builder gel to shape the nail for the next steps, as stated above.

    5. Cleanse the nail, and file the gel according to the clients' desires wiping off the file dust.

    6. Apply type of finish gel or top gloss - Cure in UV lamp for 2 min.

    7. Cleanse the nail plate thoroughly using cotton or gauze IF a type of Top Gloss was used.
    8. Apply oil on the nails in order to protect the cuticles.

  • French Nail Application(Thick French)- Type 2B

    1. Apply protein bond.

    2. Scoop a type of foundation gel with a gel brush and apply evenly onto the nail plate. - Cure in UV lamp for 2 min.

    3. Draw a thick layer of smile line using French White Gel. - Cure in UV lamp for 3 min.

    4. Apply type of builder gel to reinforce the nail with thickness and shape for the next step. - Cure in UV lamp for 2 min. There are two different types of applying the builder gel:

    b. If you want to avoid steps 5 and 6, you must apply a layer of builder gel on the center of the nail bed and push the coat around towards the cuticle and side areas to form a groove, then you must apply a second layer on the center of the nail bed to make an arch shape on the nail (* this step is best for nails in good condition. Then proceed to step 7.)

    5. Cleanse the nail, and file the gel according to the clients' desires wiping off the file dust.
    6. Apply type of finish gel or top gloss - Cure in UV lamp for 2 min.
    7. Cleanse the nail plate thoroughly using cotton or gauze IF a type of Top Gloss was used.
    8. Apply oil on the nails in order to protect the cuticles.

  • Tip Application without French White

    1. Prepare the nail.

    2. File the side of the tip that must be placed on top of the nail in order to create a smooth layer.

    3. Glue the edge of the filed side and place it on the nail.

    4. Cut off the excess tip according to the clients' desires.

    5. Then follow the steps for normal gel application.

  • Sculpture Form Application with French White (Full)

    1. Prepare the nail.

    2. Place the Sculpture form right underneath the nail bed, making sure the Sculpture form is parallel to
    the nail bed.

    3. Apply protein bond.

    4. Scoop a type of foundation gel with a gel brush and apply evenly onto the nail plate and onto the Sculpture form with the desired length of the client. - Cure in UV lamp for 2 min.

    5. Remove the Sculpture form by squeezing together the two corners and bend the sculpture form gently away from the foundation gel making sure the gel layer does not break.

    6. Follow the steps 3~8 in French Nail Application Type 2A to complete the gel application.

  • Sculpture Form Application with French White (Simple)

    1. Prepare the nail.

    2. Place the Sculpture form right underneath the nail bed, making sure the Sculpture form is parallel to the nail bed.

    3. Apply protein bond.

    4. Scoop a type of foundation gel with a gel brush and apply evenly onto the nail plate and onto the Sculpture form with the desired length of the client. - Cure in UV lamp for 2 min.

    5. Remove the Sculpture form by squeezing together the two corners and bend the sculpture form gently away from the foundation gel making sure the gel layer does not break.

    6. Follow the steps 3~8 in French Nail Application Type 2B to complete the gel application.1

  • Liquid Color Gel Application

    1. Apply the dehydrator (To remove grease from natural nails)

    2. Apply the base/top for liquid color gel, cure in UV lamp for 2 min

    3. Using the cleaner, cleanse the nail plate thoroughly

    4. Allpy the liquid color gel, cure in UV lamp for 2 min
    (You can apply second coat if you like)

    5. Apply the base/top for liquid color gel this time for a lossy shiny, cure in UV lamp for 2 min

    6. Using the cleaner, cleanse the nail plate thoroughly

  • Nail Preparation

  • How to Apply Base Gel

  • How to Apply French White Gel

  • How to Apply Builder Gel

  • French Nail Application
    (Thin French)- Type 1

  • French Nail Application
    (Thick French)- Type 2A

  • French Nail Application
    (Thick French)- Type 2B

  • Tip Application without
    French White

  • Sculpture Form Application
    with French White (Full)

  • Sculpture Form Application
    with French White (Simple)

  • Liquid Color Gel Application